Shop every Tohatsu 25 HP outboard for sale: MFS25 four strokes in manual or electric start with 15 or 20 inch shafts, plus the MFS25 jet for shallow rivers. Light, strong power for skiffs and RIBs, listed with prices and shipped worldwide.

Showing all 4 results

Tohatsu 25 HP Outboard for Sale: MFS25 and MFS25 Jet

The Tohatsu MFS25 is a light, fuel injected four stroke that steps up from the twin cylinder MFS20 to a larger engine with more torque. It is a strong match for skiffs, jon boats and RIBs that carry heavier loads. Tohatsu also offers a jet version for running shallow, rocky rivers. Here is every Tohatsu 25 HP outboard for sale in our stock.

Propeller Models

Jet Model

D is the generation, EF electric start and S or L the 15 or 20 inch shaft.

Propeller or Jet?

For most boats, a propeller model is best: it is more efficient and faster. The jet version replaces the propeller with a pump, so nothing hangs below the hull. On plane, it can run over gravel bars and rocks in water far too shallow for a prop. Jets trade some speed and economy for that ability, so choose one only if you regularly run very shallow water.

Boats That Suit a Tohatsu 25

  • Skiffs and jon boats of 4 to 4.9 metres.
  • RIBs and inflatables of 3.8 to 4.3 metres.
  • Work, dive and rental boats needing dependable power.
  • Flat bottom river boats, using the jet.

Why the MFS25?

  • Light weight for its power, typical of Tohatsu.
  • Fuel injection for easy starts and good economy.
  • Electric start options with battery charging.
  • Great value compared with similar motors.

Choosing Your MFS25

  1. Decide between prop and jet.
  2. Measure your transom: about 15 inches for S, about 20 inches for L.
  3. Choose manual or electric start.

Jet Care

Grease the jet bearing as the manual advises, check the intake grate for debris and adjust impeller clearance as it wears. Mount the jet at the correct height relative to the hull bottom for best performance.

Care Tips

  • Flush after salt water use.
  • Change engine and gear oil on schedule.
  • Use fresh fuel and a water separating filter.

Who Buys a Tohatsu 25?

Our MFS25 buyers range from anglers with small aluminium skiffs to dive operators running RIBs and river guides who choose the jet version for shallow water. Many choose Tohatsu because it is light for its power, which matters on small hulls, and because its simple design and fuel injection make it dependable with little maintenance. Fleet operators appreciate the competitive price and good parts availability.

Getting the Best Performance

Keep weight balanced and slightly forward, set the trim so the boat runs level and choose a prop that lets the motor reach its recommended full throttle revs with your normal load. Heavier work boats often run better on a lower pitch prop, while light skiffs can use more pitch for speed.

Frequently Asked Questions

Is the Tohatsu 25 fuel injected?

Yes, the MFS25 uses fuel injection.

Is the jet slower?

Generally yes, in exchange for shallow water ability.

25 or 30 HP?

See the Tohatsu 30 HP if your boat is rated higher.

How to Order

Every engine in this category is listed with its full model code and price. Choose the version that matches your transom height, steering and starting needs, then ask us for a freight quote to your country or nearest port. We ship worldwide with tracking, and your quote shows the full delivery cost before you pay. Call or WhatsApp +1 209 690 5983, or message us through our contact page. To compare other sizes, see our full range of Tohatsu outboards.