Mercury 25hp Jet Outboard | 25ELPT

Description

The Mercury 25hp jet outboard 25ELPT is a remote steer, electric start jet outboard with power trim and tilt. It’s built for console river boats and jet boats that need to run shallow, rocky or weedy water where a propeller simply can’t go. It uses Mercury’s three cylinder, 526 cc fuel injected powerhead and a jet pump in place of a gearcase, and it comes with a 6.6 gallon fuel tank and fuel line. We have it for sale new with the Mercury factory warranty and ship worldwide.

If your river boat has a steering wheel and a remote control rather than a tiller, this is the 25 hp jet that fits it.

On this page:

• Why the Mercury 25hp jet outboard 25ELPT
• Remote steering and power trim
• Boats and uses
• Features
• Specifications
• Jet care
• Alternatives
• Price and shipping
• FAQ

Why the Mercury 25hp jet outboard 25ELPT

Jet boats let you reach water most boaters never see: shallow braided rivers, rocky runs, flooded backwaters and tidal flats. The Mercury 25hp jet outboard 25ELPT gives a console river boat that ability with a smooth, reliable three cylinder EFI engine. Electronic fuel injection means consistent starting and crisp throttle response. The stainless steel impeller stands up to sand and gravel drawn through the pump.

Being a remote model, it’s controlled from the helm with a steering wheel and a side or binnacle mount control. That’s more comfortable for longer runs, keeps the driver dry behind a console, and lets you set up the boat more like a conventional runabout.

Remote steering and power trim

Power trim and tilt lets you adjust the jet’s angle on the move and raise it fully for trailering or beaching, all from a switch at the helm. On a jet, trim affects how the boat rides and how the pump draws water, so being able to adjust it easily matters. Remote steering needs a steering system, a remote control box, cables and an ignition harness, which are usually supplied and fitted separately to suit your boat. Ask us and we’ll help you with a full package.

Model code: 25 hp powerhead, E electric start, L transom height, PT power trim and tilt, Jet jet drive. On this listing, the shaft is shown as 15 inch. Jet transom heights must match the hull, so check your boat’s requirement before ordering.

Boats and uses for the Mercury 25hp jet outboard 25ELPT

• Console aluminum river boats
• Jet sleds and flat bottom boats on shallow rivers
• Guiding and fishing boats on rocky rivers
• Rescue and work boats where no exposed prop is safer

On the water

Start from the helm with the key, and the three cylinder idles smoothly. Trim down, get on plane in deeper water, then carry on into the shallows. Avoid powering hard or idling in very shallow water to keep gravel out of the pump. Full throttle is 5,000 to 5,500 rpm.

Buyer questions

“Is rigging included?”

Remote control, cables, steering and battery are usually extra and chosen to suit your boat. We can quote a complete package.

“How does a jet compare with a prop motor?”

A jet gives up some efficiency in exchange for shallow water access. Expect roughly 70% of the prop version’s performance.

Mercury 25hp jet outboard 25ELPT features

• Jet pump drive with stainless steel impeller
• Three cylinder, 526 cc EFI four stroke
• Electric start
• Remote mechanical steering
• Power trim and tilt
• 6.6 gallon external fuel tank and fuel line hose
• Service tool kit and parts
• Stop switch lanyard
• Owner’s manual
• Mercury Marine 3 year warranty

Mercury 25hp jet outboard 25ELPT specifications

For the manufacturer’s own overview of the range, see Mercury’s FourStroke outboards page. Mercury updates details between model years, so if one spec really matters to your purchase, ask us and we’ll confirm it on the exact unit we ship.

Caring for the Mercury 25hp jet outboard 25ELPT

Intake grate: clear debris regularly.

Impeller: check and adjust clearance periodically.

Bearings: grease the pump bearing on schedule.

Engine: fresh fuel, regular oil changes, fresh water flush after use.

Power trim: check fluid level and connections.

If you’re newer to boating, the US Coast Guard boating safety site is worth a read. It’s written for US boaters, but the advice on kill cords, life jackets, fuel handling and navigation rules applies wherever you are in the world.

How an outboard jet works

A jet outboard like the Mercury 25hp jet outboard 25ELPT replaces the normal gearcase and propeller with a jet pump. Water is drawn up through an intake grate under the boat, accelerated by an impeller inside the pump housing, and pushed out the back as a powerful stream. There’s no propeller hanging below the hull.

That means the pump sits roughly level with the bottom of the boat, so you can run in water just inches deep: shallow rivers, rocky runs, gravel bars, flooded timber and tidal flats where a propeller would be destroyed. It’s also why jets are popular for rescue and river work, as there’s no exposed spinning prop near people in the water.

The trade off is efficiency. A jet uses some of the engine’s power to drive the pump, so a jet outboard produces less thrust than the same powerhead with a propeller. As a rule of thumb, expect roughly 70% of the prop version’s performance. Most jet buyers are happy with that, because the places they want to go simply aren’t reachable with a prop.

Jets also need a little care. Clear the intake grate of weed and debris, check the impeller clearance periodically, and grease the bearings as the owner’s manual describes. The stainless impeller Mercury uses stands up well to sand and small stones, which is exactly what river boaters run into.

Why three cylinders make a difference

Most outboards in the 15 to 20 hp class use two cylinders. Mercury’s 25 and 30 hp EFI motors, including the Mercury 25hp jet outboard 25ELPT, use three. That matters more than you might think. With three cylinders, the power pulses overlap more evenly, so the engine runs noticeably smoother, with less vibration through the tiller and transom. It also idles more steadily, which you appreciate when trolling or creeping through a no wake zone.

The 526 cc displacement gives strong low end torque, so the boat gets up on the plane briskly without having to rev the engine hard. And because the engine isn’t working as hard at cruise, it tends to be quieter and more economical than a smaller engine pushed to its limit.

What electronic fuel injection means for you

The Mercury 25hp jet outboard 25ELPT uses electronic fuel injection, or EFI, instead of a carburetor. In plain terms, a small computer measures things like air temperature and engine load and injects exactly the right amount of fuel every time. You don’t need to fiddle with a choke. It starts easily whether it’s a frosty morning or a hot afternoon, it idles smoothly, and it responds cleanly when you open the throttle.

EFI is also less fussy about sitting. Carburetors have tiny jets and a fuel bowl that gum up when old fuel evaporates inside them. A sealed injection system is much more tolerant, although fresh fuel is still the best policy. And because the fuel is metered precisely, EFI motors tend to be more economical, which means more time on the water per tank.

Mercury’s small EFI engines can even start and run without a battery on manual start models: the pull of the cord generates enough power for the fuel injection system to fire. That’s a clever bit of engineering, and it means you get the benefits of EFI without having to carry a battery if you don’t want to.

Trailering with your motor

Most owners of a motor like the Mercury 25hp jet outboard 25ELPT leave it on the boat and trailer them together. A few habits protect the motor on the road. Use a transom saver or motor support bracket where recommended, so the motor isn’t bouncing on its tilt mechanism over bumps. Make sure there’s good ground clearance under the skeg. Close the fuel vent and disconnect the fuel line. And check the motor mounting bolts or clamps before every trip, because vibration on the road can loosen them over time.

At the ramp, lower the motor only once there’s enough water under it, and raise it before you drive the boat onto the trailer. It sounds obvious, but a surprising number of skegs and props get damaged at the ramp rather than out on the water.

Using your motor through the seasons

In spring, check the oil, fit fresh fuel, look over the fuel line and connectors for cracks, and run the engine on a flushing attachment or in a test tank before the first real trip. Look for a strong cooling stream and a smooth idle.

Through summer, the main jobs are fresh fuel, regular oil checks and rinsing after saltwater use. Keep an eye on the propeller for dings. A damaged prop costs you speed and fuel, and can cause vibration.

In autumn, before the boat is laid up, do the full storage routine: flush, change the oil and gear lube, deal with the fuel system as the owner’s manual describes, grease the moving parts and store the Mercury 25hp jet outboard 25ELPT somewhere dry. Twenty minutes in autumn saves hours of frustration in spring.

Paperwork, warranty and keeping records

When your Mercury 25hp jet outboard 25ELPT arrives, write down the serial number and keep it with your invoice. Take a photo of the serial plate on your phone too. If you ever need warranty work, a dealer will ask for both, and it makes the process much quicker. The Mercury factory warranty starts from the date of purchase, so hang on to that paperwork.

It is also worth keeping a simple log: date, engine hours if you have them, oil changes, gear lube changes, impeller replacements and anything unusual you noticed. It takes seconds after each service, and it adds real value if you ever sell the boat. Buyers pay more for an engine with a clear service history, and it helps any mechanic you work with understand the motor quickly.

Check your boat insurance as well. Many policies have specific requirements for outboard security, such as a lock on the clamps or bracket, and some ask for the serial number. Better to sort that out on day one than find out after a problem.

Why buy from us

We deal in outboard motors every day, and we would rather give you a straight answer than make a quick sale. If you are not sure the Mercury 25hp jet outboard 25ELPT is the right motor for your boat, message us with the make, model and length of the boat, how you use it and where you boat. We will tell you honestly whether it is a good match or whether something else would suit you better.

Every motor is packed carefully for the journey, and we keep you updated from dispatch to delivery with tracking. We ship worldwide, and we are happy to explain in advance what to expect with import duties and local taxes in your country, so there are no surprises when it arrives.

After you buy, we are still here. If you have questions about setup, break in or maintenance, just ask.

A small spares kit worth carrying

You do not need a workshop on board, but a few cheap parts turn most breakdowns into a ten minute fix. For the Mercury 25hp jet outboard 25ELPT, we suggest a spare spark plug and the right spanner, spare propeller hardware, a spare kill cord, a small bottle of engine oil, a couple of fuses if the motor has electrics, and a fuel line O ring or connector seal. Add some cable ties, a roll of self amalgamating tape and a basic multi tool.

Pack it all in a small dry bag, keep it in the boat, and check it every spring. Most owners never need it. The ones who do are very glad it was there.

A quick checklist before every trip

It sounds obvious, but most days that go wrong on the water start with something small that got missed at the dock. Before you head out with your Mercury 25hp jet outboard 25ELPT, run through this in your head:

• Enough fresh fuel for the trip, plus a sensible margin
• Engine oil checked and at the right level
• Motor mounted securely and everything tight
• Kill cord clipped to you, not left on the tiller or dash
• Cooling telltale spraying water once the engine is running
• Life jackets, a way to call for help, and a small spares kit aboard

It takes a minute or two. It is also the habit that separates relaxed boat owners from the ones waiting for a tow.

More questions we get asked

Can I install the Mercury 25hp jet outboard 25ELPT myself?

Many owners do, following the owner’s manual. If you are not confident with mounting, rigging or electrics, a local marine mechanic can set it up quickly, and it is money well spent.

How often does it need servicing?

Check the oil before every trip. Change the engine oil and gear lube at least once a year, or at the hour intervals in the owner’s manual, whichever comes first. Inspect the water pump impeller regularly and replace it as recommended.

What fuel should I use?

Fresh unleaded petrol of the octane rating shown in the specifications, with no more than 10% ethanol, unless it is a propane model. Old fuel is the cause of most running problems.

Can I pay in instalments?

Payment options vary by country. Contact us and we will tell you what is available for your order.

Why fuel care matters so much

If there’s one thing that decides whether an outboard starts first time or leaves you pulling and swearing at the ramp, it’s fuel. Modern petrol, especially with ethanol blended in, starts to break down within weeks. It absorbs moisture, separates and leaves gummy deposits that block the tiny passages in fuel systems.

For your Mercury 25hp jet outboard 25ELPT, the rules are simple. Buy fresh fuel from a busy station. Don’t store it for months in a can. Keep the tank vent closed when the boat isn’t in use. Use a fuel stabiliser if the boat will sit for more than a few weeks. And before any long lay up, deal with the fuel system as the owner’s manual describes, rather than leaving old fuel inside the engine. It’s a few minutes of effort that saves a lot of cost and frustration.

Your first run

The first hours of a new engine matter. For your Mercury 25hp jet outboard 25ELPT, follow the break in guidance in the owner’s manual. In broad terms: run at varied speeds, avoid long periods at full throttle, and don’t let it idle for ages either. Keep an eye on the cooling telltale and gauges, and listen for anything unusual.

After the break in period, change the engine oil and filter if fitted, and check the gear lube. From then on, just use it and service it on schedule. A well run in engine rewards you with smoother running and a longer life.

Alternatives to the Mercury 25hp jet outboard 25ELPT

25ELHGA Jet (tiller): tiller steering with gas assist tilt.

Mercury Marine Jet 25 hp (remote, 20 inch): remote jet for a 20 inch transom.

35ELPT Jet: more power, remote, power trim.

See our main Mercury outboard motors category.

Mercury 25hp jet outboard 25ELPT for sale: price and worldwide shipping

The current price of the Mercury 25hp jet outboard 25ELPT is shown at the top of this page. You can add it to your cart and check out straight away, or if you’d rather talk to a person first, send us a message through our contact page and we’ll come back to you with a full delivered price to your country.

What you get

• Mercury 25hp jet outboard 25ELPT, new
• 6.6 gallon fuel tank and fuel line hose
• Service tool kit and parts
• Stop switch lanyard
• Owner's manual
• Mercury Marine 3 year factory warranty

Remote control, cables, steering and battery can be quoted separately.

Shipping worldwide

We ship to buyers all over the world. Every motor is packed securely for the journey and sent by courier, freight or sea depending on its size and where you are, with tracking from dispatch to delivery. Import duty and local taxes depend on your country, and we’re happy to explain what to expect before you pay so there are no surprises.

Buying with confidence

Have a read of our refund and return policy, see what other boat owners have said on our customer reviews page, and find out more about who we are on the about page.

Mercury 25hp jet outboard 25ELPT FAQ

Is the Mercury 25hp jet outboard 25ELPT remote or tiller?

Remote mechanical steering.

Does it have power trim?

Yes, power trim and tilt.

Is a fuel tank included?

Yes, a 6.6 gallon tank and line.

Do you ship worldwide?

Yes. Contact us for a delivered quote.

Order your Mercury 25hp jet outboard 25ELPT

Shallow water access for console river boats, with power trim and EFI. Add the Mercury 25hp jet outboard 25ELPT to your cart now, or send us a question first. You can also compare it with the rest of our outboard motors for sale.